Fill a wheelbarrow with sand (3/4 full) and combine it with ½ of a bag of cement, add water and mix. Using a shovel and rubber mallet, fill the parameter trench with concrete and set the paver border as you go. Sweep sand on the top surface area of your newly laid pavers.Click to see full answer. People also ask, can I install pavers myself?Pavers may be the easiest patio surface to install yourself. Pavers are set on sand or crushed concrete rather than bound with mortar. You can even lay pavers on top of your existing patio if it’s level and in good condition, so there’s no need to break up the old patio or excavate the ground.Also, how do you lay pavers in the desert? Lay the pavers on top of the sand, beginning in one corner and moving in a line to the opposite corner. Tap the surface of each paver with a rubber mallet to seat it into the sand to a depth of about 1/2 inch. Fill in all the pavers until the patio area is complete. Use the level to make sure all the pavers are flat. In respect to this, can you lay pavers directly on dirt? A backyard patio and a casual brick walkway are two types of surfaces you can build with brick pavers. Laying bricks on dirt is not complicated. But there are several steps involved to ensure the bricks will not shift or sink into the dirt over time.Can you just lay pavers on grass?Although it’s possible to lay pavers directly on the ground without digging, over time they’ll sink and become uneven, which may lead to cracked pavers and full-on invasion by weeds and grasses.